Request a call icon

Plain bearings

Plain bearings are available in many designs and sizes. Basic bearing designations are indicated in the catalogue datasheets and are in accordance with international ISO and/or GOST standards. The system listed below with suffixes is applied to differentiate design variants.

You can get in touch with our services to clarify a bearing design availability, to get additional bearing technical data, which is not listed in the catalogue as well as to discuss with our technical experts your specific requirements for a bearing design.

To buy plain bearings at a low price contact us in any way.

Designation formula

Basic designation (GE …, GEH …)  External design (C, S, E, EX, 2RS)

Prefix and suffix designations

GE … standard design
GEH … wider inner ring and larger outside diameter compared to GE
C lubrication holes and an annular groove in the inner ring
S lubrication holes and an annular groove in both rings
E outer ring fractured at one point
EX outer ring fractured at two points
2RS NRB contact seal on both sides

Spherical plain bearings with lubrication grooves and holes in the inner ring and with the outer ring fractured at one point

Designation Dimensions Weight
BBC-R GOST d D B C Tilt angle d1 d2 kg
GE 8 EC ШСП8 8 17 8 5 – 10 13 0,01
GE 10 EC ЕШСП10 10 19 9 6 12 13 16 0,01
GE 10 EC ШСП10 10 20 9 6 – 13 16 0,01
GE 12 EC ШСП12 12 22 10 7 10 15 18 0,02
GE 15 EC ШСП15 15 28 12 8 – 18 23 0,04
GE 15 EC ЕШСП15 15 26 12 9 8 18 22 0,04
GE 17 EC ШСП17 17 32 14 10 – 22 26 0,05
GE 17 EC ЕШСП17 17 30 14 10 10 20 25 0,05
GE 20 EC ШСП20 20 35 16 12 9 24 29 0,07
GEH 20 EC 2ШСП20 20 47 26 15 22 23 35 0,19
GE 25 EC ШСП25 25 42 20 16 7 29 35 0,12
GEH 25 EC 2ШСП25 25 52 28 15 22 28 40 0,26
GE 30 EC ШСП30 30 47 22 18 6 33 40 0,16
GE 35 EC ШСП35 35 55 26 21 7 39 47 0,23
GE 35 EC ЕШСП35 35 55 25 20 6 39 47 0,24
GE 40 EC ШСП40 40 62 28 22 7 45 53 0,33
GE 42 EC ШСП42 42 62 25 22 6 47 56 0,35
GE 45 EC ШСП45 45 70 32 25 6 50 60 0,46
GE 45 EC ЕШСП45 45 68 32 25 7 50 60 0,43
GE 50 EC ШСП50 50 75 35 28 6 55 66 0,66
GE 55 EC ШСП55 55 85 40 32 7 62 74 0,88
GE 60 EC ШСП60 60 90 44 34 – 66 80 0,98
GE 60 EC ЕШСП60 60 90 44 36 6 66 80 1,10
GE 70 EC ШСП70 70 105 49 40 6 77 92 1,59
GE 80 EC ШСП80 80 120 55 45 6 88 105 2,33
GE 90 EC ШСП90 90 130 60 50 5 98 115 2,82
GE 100 EC ШСП100 100 150 70 55 7 109 130 4,48
GE 110 EC ШСП110 110 160 70 55 6 120 140 4,90
GE 120 EC ШСП120 120 180 85 70 6 130 160 8,19
GE 140 EC ШСП140 140 210 90 70 7 150 180 11,11
GE 160 EC ШСП160 160 230 105 80 8 170 200 14,06
GE 180 EC ШСП180 180 260 105 80 6 192 225 18,60

Spherical plain bearings with lubrication grooves and holes in the inner ring and with the outer ring fractured at two points

Designation Dimensions Weight
BBC-R GOST d D B C Tilt angle d1 d2 kg
GE 8 EXC ШСЛ8 8 17 8 5 – 10 13 0,01
GE 10 EXC ЕШСЛ10 10 19 9 6 12 13 16 0,01
GE 10 EXC ШСЛ10 10 20 9 6 – 13 16 0,01
GE 12 EXC ШСЛ12 12 22 10 7 10 15 18 0,02
GE 15 EXC ШСЛ15 15 28 12 8 – 18 23 0,04
GE 15 EXC ЕШСЛ15 15 26 12 9 8 18 22 0,04
GE 17 EXC ШСЛ17 17 32 14 10 – 22 26 0,05
GE 17 EXC ЕШСЛ17 17 30 14 10 10 20 25 0,05
GE 20 EXC ШСЛ20 20 35 16 12 9 24 29 0,07
GEH 20 EXC 2ШСЛ20 20 47 26 15 22 23 35 0,19
GE 25 EXC ШСЛ25 25 42 20 16 7 29 35 0,12
GEH 25 EXC 2ШСЛ25 25 52 28 15 22 28 40 0,26
GE 30 EXC ШСЛ30 30 47 22 18 6 33 40 0,16
GE35 EXC ШСЛ35 35 55 26 21 7 39 47 0,24
GE 35 EXC ЕШСЛ35 35 55 25 20 6 39 47 0,24
GE 40 EXC ШСЛ40 40 62 28 22 7 45 53 0,33
GE 40 EXC ШСЛ45 45 70 32 25 6 50 60 0,46
GE 45 EXC ЕШСЛ45 45 68 32 25 7 50 60 0,43
GE 50 EXC ШСЛ50 50 75 35 28 6 55 66 0,66
GE 55 EXC ШСЛ55 55 85 40 32 7 62 74 0,88
GE 60 EXC ШСЛ60 60 90 44 34 7 66 80 0,94
GE 60 EXC ЕШСЛ60 60 90 44 36 6 66 80 1,10
GE 70 EXC ШСЛ70 70 105 49 40 6 77 92 1,59
GE 80 EXC ШСЛ80 80 120 55 45 6 88 105 2,33
GE 90 EXC ШСЛ90 90 130 60 50 5 98 115 2,82
GE 100 EXC ШСЛ100 100 150 70 55 7 109 130 4,48
GE 110 EXC ШСЛ110 110 160 70 55 6 120 140 4,90
GE 120 EXC ШСЛ120 120 180 85 70 6 130 160 8,19
GE 140 EXC ШСЛ140 140 210 90 70 7 150 180 11,11
GE 160 EXC ШСЛ160 160 230 105 80 8 170 200 14,06
GE 180 EXC ШСЛ180 180 260 105 80 6 192 225 18,60

Spherical plain bearings with lubrication grooves and holes in the inner ring

Designation Dimensions Weight
BBC-R GOST d D B C Tilt angle d1 d2 kg
GE 8 C ШС8 8 17 8 5 – 10 13 0,01
GE 10 C ЕШС10 10 19 9 6 12 13 16 0,01
GE 10 C ШС10 10 20 9 6 – 13 16 0,01
GE 12 C ШС12 12 22 10 7 10 18 10 0,02
GE 15 C ШС15 15 28 12 8 – 18 23 0,04
GE 15 C ЕШС15 15 26 12 9 8 18 22 0,04
GE 17 C ШС17 17 32 14 10 – 22 26 0,05
GE 17 C ЕШС17 17 30 14 10 10 20 25 0,05
GE 20 C ШС20 20 35 16 12 9 24 29 0,07
GEH 20 C 2ШС20 20 47 26 15 22 23 35 0,19
GE 25 C ШС25 25 42 20 16 7 29 35 0,12
GEH 25 C 2ШС25 25 52 28 15 22 28 40 0,26
GE 30 C ШС30 30 47 22 18 6 33 40 0,16
GE 35 C ШС 35 35 55 26 21 – 39 47 0,24
GE 35 C ЕШС35 35 55 25 20 6 39 47 0,24
GE 40 C ШС40 40 62 28 22 7 45 53 0,33
GE45 C ШС 45 45 70 32 25 – 50 60 0,43
GE 45 C ЕШС45 45 68 32 25 7 50 60 0,43
GE 50 C ШС50 50 75 35 28 6 55 66 0,66
GE 55 C ШС55 55 85 40 32 7 62 74 0,88
GE 55 C ШС60 60 90 44 34 – 66 80 1,10
GE 60 C ЕШС60 60 90 44 36 6 66 80 1,10
GE 70 C ШС70 70 105 49 40 6 77 92 1,59
GE 80 C ШС80 80 120 55 45 6 88 105 2,33
GE 90 C ШС90 90 130 60 50 5 98 115 2,82
GE 100 C ШС100 100 150 70 55 7 109 130 4,48
GE 110 C ШС110 110 160 70 55 6 120 140 4,90
GE 120 C ШС120 120 180 85 70 6 130 160 8,19
GE 140 C ШС140 140 210 90 70 7 150 180 11,11
GE 160 C ШС160 160 230 105 80 8 170 200 14,06
GE 180 C ШС180 180 260 105 80 6 192 225 18,60

Spherical plain bearings with lubrication grooves and holes in the inner ring and the outer ring

Designation Dimensions Weight
BBC-R GOST d D B C Tilt angle d1 d2 kg
GE 8 S ШС8К 8 17 8 5 – 10 13 0,008
GE 10 S ЕШС10К 10 19 9 6 12 13 16 0,01
GE 10 S ШС10К 10 20 9 6 – 13 16 0,01
GE 12 S ШС12К 12 22 10 7 10 15 18 0,02
GE 15 S ШС15К 15 28 12 8 – 18 23 0,04
GE 15 S ЕШС15К 15 26 12 9 8 18 22 0,04
GE 15 S ШС17К 17 32 14 10 – 22 26 0,05
GE 17 S ЕШС17К 17 30 14 10 10 20 25 0,05
GE 20 S ШС20К 20 35 16 12 9 24 29 0,07
GEH 20 S 2ШС20К 20 47 26 15 22 23 35 0,19
GE 25 S ШС25К 25 42 20 16 7 29 35 0,12
GEH 25 S 2ШС25К 25 52 28 15 22 28 40 0,26
GE 30 S ШС30К 30 47 22 18 6 33 40 0,16
GE 35 S ШС35К 35 55 26 21 – 39 47 0,24
GE 35 S ЕШС35К 35 55 25 20 6 39 47 0,24
GE 40 S ШС40К 40 62 28 22 7 45 53 0,33
GE 45 S ШС45К 45 70 32 25 – 50 60 0,43
GE 45 S ЕШС45К 45 68 32 25 7 50 60 0,43
GE 50 S ШС50К 50 75 35 28 6 55 66 0,66
GE 55 S ШС55К 55 85 40 32 7 62 74 0,88
GE 60 S ЕШС60К 60 90 44 36 6 66 80 1,1
GE 70 S ШС70К 70 105 49 40 6 77 92 1,59
GE 80 S ШС80К 80 120 55 45 6 88 105 2,33
GE 90 S ШС90К 90 130 60 50 5 98 115 2,82
GE 100 S ШС100К 100 150 70 55 7 109 130 4,48
GE 110 S ШС110К 110 160 70 55 6 120 140 4,9
GE 120 S ШС120К 120 180 85 70 6 130 160 8,19
GE 140 S ШС140К 140 210 90 70 7 150 180 11,11
GE 160 S ШС160К 160 230 105 80 8 170 200 14,06
GE 180 S ШС180К 180 260 105 80 6 192 225 18,6

Spherical plain bearings without lubrication grooves and holes and with the outer ring fractured at one point

Designation Dimensions Weight
BBC-R GOST d D B C Tilt angle d1 d2 kg
GE 8 E ШП80 8 17 8 5 – 10 13 0,01
GE 10 E ЕШП10 10 19 9 6 12 13 16 0,01
GE 10 E ШП10 10 20 9 6 – 13 16 0,01
GE 12 E ШП12 12 22 10 7 10 15 18 0,02
GE 15 E ШП 15 15 28 12 8 – 18 23 0,04
GE 15 E ЕШП15 15 26 12 9 8 18 22 0,04
GE 17 E ШП17 17 32 24 10 – 22 26 0,05
GE 17 E ЕШП17 17 30 14 10 10 20 25 0,05
GE 20 E ШП20 20 35 16 12 9 24 29 0,07
GEH 20 E 2ШП20 20 47 26 15 22 23 35 0,19
GE 25 E ШП25 25 42 20 16 7 29 35 0,12
GEH 25 E 2ШП25 25 52 28 15 22 28 40 0,26
GE 30 E ШП30 30 47 22 18 6 33 40 0,16
GE 35 E ШП35 35 55 26 21 – 39 47 0,24
GE 35 E ЕШП35 35 55 25 20 7 39 47 0,24
GE 40 E ШП40 40 62 28 22 7 45 53 0,33
GE 45 E EШП45 45 68 32 25 7 50 60 0,46
GE 45 E ШП 45 45 70 32 25 – 50 60 0,46
GE 50 E ШП50 50 75 35 28 6 55 66 0,66
GE 55 E ШП55 55 85 40 32 7 62 74 0,88
GE 60 E ЕШП60 60 90 44 36 6 66 80 1,10
GE 70 E ШП70 70 105 49 40 6 77 92 1,59
GE 80 E ШП80 80 120 55 46 6 88 105 2,33
GE 90 E ШП90 90 130 60 50 5 98 115 2,82
GE 100 E ШП100 100 150 70 55 7 109 130 4,48
GE 110 E ШП110 110 160 70 55 6 120 140 4,90
GE 120 E ШП120 120 180 85 70 6 130 160 8,19
GE 140 E ШП140 140 210 90 70 7 150 180 11,11
GE 160 E ШП160 160 230 105 80 8 170 200 14,06
GE 180 E ШП180 180 260 105 80 6 192 225 18,60

Spherical plain bearings with lubrication grooves and holes in both rings and with the outer ring fractured at one point

Designation Dimensions Weight
BBC-R GOST d D B C Tilt angle d1 d2 kg
GE 8 ES ШСП8К 8 17 8 5 – 10 13 0,01
GE 10 ES ЕШСП10К 10 19 9 6 12 13 16 0,01
GE 10 ES ШСП10К 10 20 14 9 – 13 16 0,01
GE 12 ES ШСП12К 12 22 10 7 10 15 18 0,02
GE 15 ES ШСП15К 15 28 12 8 – 18 23 0,04
GE 15 ES ЕШСП15К 15 26 12 9 8 18 22 0,04
GE 17 ES ШСП17К 17 32 14 10 – 22 26 0,05
GE 17 ES ЕШСП17К 17 30 14 10 10 20 25 0,05
GE 20 ES ШСП20К 20 35 16 12 9 24 29 0,07
GEH 20 ES 2ШСП20К 20 47 26 15 22 23 35 0,19
GE 25 ES ШСП25К 25 42 20 16 7 29 35 0,12
GEH 25 ES 2ШСП25К 25 52 28 15 22 28 40 0,26
GE 30 ES ШСП30К 30 47 22 18 6 33 40 0,16
GE 35 ES ШСП35К 35 55 26 21 – 39 47 0,24
GE 35 ES ЕШСП35К 35 55 25 20 6 39 47 0,24
GE 40 ES ШСП40К 40 62 28 22 7 45 53 0,33
GE 42 ES ШСП42К 42 62 25 22 – 47 56 0,35
GE 45 ES ШСП45К 45 70 32 25 – 50 60 0,46
GE 45 ES ЕШСП45К 45 68 32 25 7 50 60 0,43
GE 50 ES ШСП50К 50 75 35 28 6 55 66 0,66
GE 55 ES ШСП55К 55 85 40 32 7 62 74 0,88
GE 60 ES ЕШСП60К 60 90 44 36 6 66 80 1,10
GE 70 ES ШСП70К 70 105 49 40 6 77 92 1,59
GE 80 ES ШСП80К 80 120 55 45 6 88 105 2,33
GE 90 ES ШСП90К 90 130 60 50 5 98 115 2,82
GE 100 ES ШСП100К 100 150 70 55 7 109 130 4,48
GE 110 ES ШСП110К 110 160 70 55 6 120 140 4,90
GE 120 ES ШСП120К 120 180 85 70 6 130 160 8,19
GE 140 ES ШСП140К 140 210 90 70 7 150 180 11,11
GE 160 ES ШСП160К 160 230 105 80 8 170 200 14,06
GE 180 ES ШСП180К 180 260 105 80 6 192 225 18,60

Spherical plain bearings with lubrication grooves and holes in both rings and with the outer ring fractured at two points

Designation Dimensions Weight
BBC-R GOST d D B C Tilt angle d1 d2 kg
GE 8 ES 2RS – 8 17 8 5 – 10 13 0,01
GE 10 ES 2RS – 10 19 9 6 12 13 16 0,01
GE 10 ES 2RS – 10 20 14 9 – 13 16 0,01
GE 12 ES 2RS – 12 22 10 7 10 15 18 0,02
GE 15 ES 2RS – 15 28 12 8 – 18 23 0,04
GE 15 ES 2RS – 15 26 12 9 8 18 22 0,04
GE 17 ES 2RS – 17 32 14 10 – 22 26 0,05
GE 17 ES 2RS – 17 30 14 10 10 20 25 0,05
GE 20 ES 2RS – 20 35 16 12 9 24 29 0,07
GEH 20 ES 2RS – 20 47 26 15 22 23 35 0,19
GE 25 ES 2RS – 25 42 20 16 7 29 35 0,12
GEH 25 ES 2RS – 25 52 28 15 22 28 40 0,26
GE 30 ES 2RS – 30 47 22 18 6 33 40 0,16
GE 35 ES 2RS – 35 55 26 21 – 39 47 0,24
GE 35 ES 2RS – 35 55 25 20 6 39 47 0,24
GE 40 ES 2RS – 40 62 28 22 7 45 53 0,33
GE 42 ES 2RS – 42 62 25 22 – 47 56 0,35
GE 45 ES 2RS – 45 70 32 25 – 50 60 0,46
GE 45 ES 2RS – 45 68 32 25 7 50 60 0,43
GE 50 ES 2RS – 50 75 35 28 6 55 66 0,66
GE 55 ES 2RS – 55 85 40 32 7 62 74 0,88
GE 60 ES 2RS – 60 90 44 36 6 66 80 1,10
GE 70 ES 2RS – 70 105 49 40 6 77 92 1,59
GE 80 ES 2RS – 80 120 55 45 6 88 105 2,33
GE 90 ES 2RS – 90 130 60 50 5 98 115 2,82
GE 100 ES 2RS – 100 150 70 55 7 109 130 4,48
GE 110 ES 2RS – 110 160 70 55 6 120 140 4,90
GE 120 ES 2RS – 120 180 85 70 6 130 160 8,19
GE 140 ES 2RS – 140 210 90 70 7 150 180 11,11
GE 160 ES 2RS – 160 230 105 80 8 170 200 14,06
GE 180 ES 2RS – 180 260 105 80 6 192 225 18,60

Size selection

INTERNAL DIAMETER (d)

fr to mm

EXTERNAL DIAMETER (D)

fr to mm

WIDTH (B)

fr to mm

Need help?

Leave a request. Our specialists will contact you as soon as possible and will advise on all issues and questions absolutely free.

Send a request

2014

year
of foundation

99%

satisfied
clients

65

european
distributors

30

international
exhibitions

BBC representative offices

Our advantages

Own production

Own production

More than 200 units of modern high-precision equipment have been installed in production workshops.

High product quality

High product quality

The quality management system extends to the development, production and supply of bearing products to consumers.

Advanced logistic system

Advanced logistic system

An integrated system for the efficient use of vehicles and warehouses ensures maximum delivery speed.

Highly qualified staff

Highly qualified staff

The company employees have a great experience in the bearing industry. Many of them worked in the leading bearing companies.

Quality control

Quality control

Each batch of components for the production of bearings passes input control according to the drawings.

Environmental policy

Environmental policy

The company is trying to minimize its impact on the environment and the use of harmful chemicals.

We participated in exhibitions

Fill out the form and we will contact you in near future

When clicking the button you agree to the terms of the Privacy Policy

Fill out the form and we will contact you in near future

When clicking the button you agree to the terms of the Privacy Policy